Swimming Pool Repair in Dubai: Everything You Need To Know

 Having a nice swimming pool means having a little corner of paradise in the garden where you can relax after hard days of work or during the weekend. The swimming pool is now increasingly present in Italian homes and, therefore, it is very important to understand how to try to keep this particular product in the right conditions. There are various types of pools (inground and above ground, for example) but, generally, they all have more or less the same types of cleaning, maintenance and swimming pool repair in Dubai. So let’s try to fully understand how to be able to enhance your swimming pool.

The maintenance of a swimming pool is not a very simple procedure, but it requires a lot of care and precision. All aspects are important, starting from the pH regulation up to the insertion of the right amount of chlorine.

A modern villa necessarily requires a beautiful swimming pool that can currently also be built thanks to the state incentive of the eco-bonus.

Enough chatter and let’s get to the heart of the conversation. Enjoy the reading.

Beautiful inground pool in a green environment The maintenance and complete management of the pool includes a series of activities useful for cleaning and proper sanitation of the water (obviously this task is not carried out in natural pools).

All this process does not require a great waste of time and a great expenditure of money; in fact, it is also possible to use the help of some accessories to which you can entrust these simple management tasks of your pool.

The cleaning operations to be carried out concern the water, the walls and the bottom of the pool, the pump pre-filter, and the entrance ladders.

The water needs several checks to prevent it from being dirty and unsuitable for swimming in the pool. In fact, it is necessary to periodically check the pH and chlorine values ​​(too much chlorine and a higher pH could harm human skin) trying to use products suitable for disinfection.

In addition, the use of an automatic control unit is recommended to further facilitate the management of your pool.

Rules for routine maintenance of your pool

To periodically check your pool. It is useful and functional to follow these five simple activities. So as to be sure you have a well-kept and clean pool.

• Check the water and chlorine values;
• Periodically clean the pool filter;
• Carry out a complete cleaning of the pool (walls, bottom, ladder and water);
• Sanitize the water periodically to prevent bacteria and fungi from forming;
• Remove any animals present in the water.

We analyze each point in detail and exhaustively so as to remove any doubts or perplexities. By following our instructions you will be able to clean your “corner of water” effectively.

Each point is fundamental, so it is important to have forethought and precision.

The control of pH and chlorine

The person who checks the pH and chlorine values ​​Checking the water values ​​is a very important activity to better manage your in-ground pool ensuring the right protection from water.

It is advisable to keep an eye on the pH and chlorine values, since they are factors that could cause any problems on human health. Therefore, it is very important to periodically check these values ​​using manual and automatic tools.

Shock treatment with chlorine

The chlorine shock treatment is a very functional procedure to significantly improve the sanitary conditions of your swimming pool.

This treatment serves to sterilize every component of the pool (the bottom, the walls, the pipes, the pumps, and the filter). To remove all the impurities that cannot be removed by manual cleaning of the pool.

It is advisable to carry out this treatment for the first time at the beginning of the season. Then it is strongly recommended that this process be repeated every fortnight.

Superchlorination also called chlorine shock treatment, is an oxidizing process that consists in introducing a large dose of disinfectant higher than that which is normally used to clean the pool water. Generally, the amount of disinfectant is doubled but this is a choice that varies according to different and numerous factors.

PH and chlorine values

Table with pH values ​​The chlorine concentration of the pool should be between 1 part per million (ppm) and 3 ppm, while the pH value of the water must be between 7.2 and 7.6.

By respecting these values ​​you will be sure to maximize the effectiveness of chlorine in sanitizing the water and. Moreover, you will not have any problems.

Use of an automatic control unit

An automatic control unit is a device used to better manage your pool; in fact, it is able to control the pH and chlorine values ​​in the pool in a completely automatic and autonomous way.

It will try to keep these values ​​unchanged and will “notify” the owner. If a cleaning and maintenance intervention is needed to restore the parameters.

It is a device that is quite expensive but, despite this, it is definitely suitable for optimal management of your pool.

Cleaning the filter for proper maintenance of the pool

Man cleaning the pool filter Another key aspect in pool maintenance is certainly the cleaning of the filter; this activity, in fact, is very important to keep your swimming pool clean. Avoiding the presence of bacteria and fungi.  (and, of course, also the presence of small animals such as midges, bees, wasps, mosquitoes…). These animals can sneak into the pool because they are found in your garden on plants such as mulberry trees, olive trees, or even on your loved roses.

We try to understand how to carry out this precious task in the most correct way possible. Thus managing to keep your pool in perfect shape. Depending on the type of filter, a different cleaning is performed.

The most common and most used pool filter is the sand one; it is a particularly bulky filter, but it is very functional. To properly clean the sand filter (or even the glass filter) a simple backwash is required.

For a cartridge filter, however, it is sufficient to use a simple jet of water.

After cleaning the pool filter, analyze the pH of the water which must be between 7.2 and 7.6. In order to make sure you have carried out the right cleaning steps.

Cleaning the filter element

At least once a week it is highly recommended to clean the filter element if it is sand. This cleaning is carried out through the washing operation which can also be done every three / four weeks if the filter element is not sand.

Cleaning the pump pre-filter

The pre-filter is a small basket that is located in the front of the pump of any swimming pool; it has the task of removing from the pool. Retaining in a basket all the coarse material that enters the water by mistake. This is a very important function because it avoids a malfunction of the pump and, consequently, of the entire pool.